View M62446AFP_327284.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

MITSUBISHI SOUND PROCESSOR ICs
M62446AFP
6CH ELECTRONIC VOLUME WITH TONE CONTROL DESCRIPTION
The M62446AFP is 6ch electronic volume with tone control. This IC is revised from M62446FP. The extended function of M62446AFP is volume level and tone control level. M62446AFP is easy to use more than M62446FP.
FEATURES
(note) * is an extended function.
* 6ch Electric volume Volume level : 0 to -95dB(1dB/step)* * Tone control Bass/Treble : -14dB to +14dB(2dB/step)* * Noise voltage : 1.5Vrms * 4 Output ports * Bypass mode is high quality sound.
Outline 42P2R-A
0.8mm pitch 450mil ssop (8.4mmx17.5mmx2.0mm)
APPLICATION
DVD,Home Audio equipment,TV
RECOMMENDED OPERATING CONDITIONS
Supply voltage range--------------------------4.5 to 7.5V(analog), 4.5 to 5.5V(digital) Recommended supply voltage------------------------7.0V(analog), 5.0V(digital)
SYSTEM BLOCK DIAGRAM
C in SW in SL in SR in BYPASS1 BYPASS2 L in R in -com interface
volume volume volume volume
Cout SWout SLout SRout
Lout tone volume volume Rout
LATCH DATA CLK
MITSUBISHI ELECTRIC
1
MITSUBISHI SOUND PROCESSOR ICs
M62446AFP
6CH ELECTRONIC VOLUME WITH TONE CONTROL PIN CONFIGURATION AND BLOCK DIAGRAM
OUT4 OUT3 OUT2 OUT1 AVDD SW in GNDS SR in SL in GNDC C in GNDR R in GNDL Lin BYPASSR BYPASSL LTRE LBASS3 LBASS2 LBASS1
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21
tone tone volume volume volume volume volume
42 OUTPUT PORT MCU
volume
DVDD
41 CLK 40 I/F 39 38 37 36 35 34 33 32
LATCH DGND AGND SW out SR out SL out C out Rout DATA
31 Lout 30
AVSS
29 CL1 28 27 26 25 24 23 22
CL2 CR1 CR2 RTRE RBASS3 RBASS2 RBASS1
MITSUBISHI ELECTRIC
2
MITSUBISHI SOUND PROCESSOR ICs
M62446AFP
6CH ELECTRONIC VOLUME WITH TONE CONTROL PIN DESCLIPTION
Pin No. Symbol Function Circuit
1 2 3 4 5 7 10 12 14 6 8 9 11 36 35 34 33 13 15 16 17 31 32 18 25 19 24 20 23 21 26 22 28 27 29 31 32 30 37 38 39 40 41 42
OUT4 OUT3 OUT2 OUT1 AVDD GNDS GNDC GNDR GNDL SW in SR in SL in C in SW out SR out SL out C out R in L in BYPASSR BYPASSL Lout Rout LTRE RTRE LBASS3 RBASS3 LBASS2 RBASS2 LBASS1 RBASS1 CR2 CL2 CR1 CL1 Lout Rout AVSS AGND DGND LATCH DATA CLK DVDD
DVDD(=5V) Port OUTPUT
Analog positive Power supply
OUTPUT:PMOS Transistor open drain +7V Connect to analog GND
1 to 4
GND
6,8,9,11 Volume INPUT + 18 to 22K (TYP) Volume OUTPUT + 33,34,35,36
13 ,15 Tone INPUT
L,R Volume INPUT in BYPASS mode
70K (TYP) 16,17 + 70K (TYP) 18 to 22K (TYP)
L OUTPUT R OUTPUT tone Treble cycle control
31,32
18,25 2.3K (TYP) 19,24 + 20,23 21,22 26,28 27,29 + 70K (TYP) - 7V 18 to 22K (TYP) 31,32
tone Bass cycle control
Tone OUTPUT L,R Volume INPUT L OUTPUT R OUTPUT
Analog negative Power Supply
Analog GND Digital GND Latch INPUT Data INPUT Clock INPUT Forward data
Digital Power supply
39,40,41
S
INPUT : schmitt trigger type
+5V
MITSUBISHI ELECTRIC
3
MITSUBISHI SOUND PROCESSOR ICs
M62446AFP
6CH ELECTRONIC VOLUME WITH TONE CONTROL ABSOLUTE MAXIMUM RATINGS
Symbol Vsupply
Parameter Supply Voltage Power dissipation Thermal derating Operating temperature Storage temperature
Condition
AVDD-AVSS DVDD-DGND
Ratings 16 7 1000 10 -20 to +75 -40 to +125
Unit V mW mW/C C C
Pd K Topr Tstg
Ta25 C Ta>25 C
THERMAL DERATING(MAXMUM RATING) (with the standard board)
1.5 POWER DISSIPATION Pd [W]
1.0
0.5
0 0 25 50 75 100 125 150
AMBIENT TENPERATURE Ta [C]
*Standard board * board size * board thickness * board material * copper pattern copper thickness copper size
70mm X 70mm 1.6mm glass epoxy 18m 0.25mm(wide) 30mm(length/lead)
MITSUBISHI ELECTRIC
4
MITSUBISHI SOUND PROCESSOR ICs
M62446AFP
6CH ELECTRONIC VOLUME WITH TONE CONTROL RECOMMENDED OPRETING CONFITION (Ta=25C, unless otherwise noted. )
Parameter
Analog positive Supply Voltage Analog negative Supply Voltage Digital Supply Voltage High-level Input Voltage Low-level Input Voltage
Symbol AVDD AVSS
Condition
MIN 4.5
TYP 7.0
MAX 7.5
Unit V
-7.5
-7.0
-4.5
V
DVDD
4.5
5.0
5.5
V
VIH
DVDDx0.7
DVDD DVDDx0.3
V
VIL
DGND
V
(Note) AVSSDGNDRERATIONSHIP BETWEEN DATA AND CLOCK AND LATCH
H DATA
D0
L H
D1
DE
DF
D0
CLOCK
L H
LATCH L note : CLOCK and LATCH function at raising edges of pulse .
MITSUBISHI ELECTRIC
5
MITSUBISHI SOUND PROCESSOR ICs
M62446AFP
6CH ELECTRONIC VOLUME WITH TONE CONTROL DATA TIMING(Recommended conditions)
tcr
CLOCK
tr
75% 25%
tf tWHC tWLC
75%
DATA
25%
tsc
tr
tSD
tHD tSL
tf tr
tWHL
tf
75% 25%
LATCH
25%
DIGITAL BLOCK TIMING REGULATION
Symbol
tcr tWHC tWLC tr tf tSD tHD tSL tWHL tSC
Parameter
CLOCK cycle time CLOCK pulse width ("H"level) CLOCK pulse width ("L"level) CLOCK,DATA,LATCH rise time CLOCK,DATA,LATCH fall time DATA setup time DATA hold time LATCH setup time LATCH pulse width CLOCK start time after LACTH
Limits Min typ
8 3.2 3.2
Max
Unit
0.8 0.8 1.6 1.6 2 3.2 3.2 sec
MITSUBISHI ELECTRIC
6
MITSUBISHI SOUND PROCESSOR ICs
M62446AFP
6CH ELECTRONIC VOLUME WITH TONE CONTROL DIGITAL CONTROL SPECIFICATION
Fore kinds of input format options are available by changing slot settings of DE and DF. (When the IC is powered up , the internal settings are not fixed.)
(1)
D01 D11 D21 D31 D41 D51 D61 D71 D81 D91 DA1 DB1 DC1 DD1 DE 1 TONE CONT TLEBLE 2 3 4 TONE CONT BASS 0
TONE :0 BYPASS :1
DF
0
0
OUTPUT PORT n CONT High:1,Low:0
(2)
D02 D12 D22 D32 D42 D52 D62 D72 D82 D92 DA2 DB2 DC2 DD2 DE
DF
VOLUME Lch
VOLUME Rch
0
1
(3)
D03 D13 D23 D33 D43 D53 D63 D73 D83 D93 DA3 DB3 DC3 DD3 DE
DF
VOLUME Cch
VOLUME SWch
1
0
(4)
D04 D14 D24 D34 D44 D54 D64 D74 D84 D94 DA4 DB4 DC4 DD4 DE
DF
VOLUME SLch
VOLUME SRch
1
1
MITSUBISHI ELECTRIC
7
MITSUBISHI SOUND PROCESSOR ICs
M62446AFP
6CH ELECTRONIC VOLUME WITH TONE CONTROL SETTING CODE
(1) Tone control (bass / treble)
(Note) * is an extended function. ATT
Treble bass
D01 D81 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0
D11 D91 1 1 1 1 0 0 0 0 0 0 0 1 1 1 1
D21 DA1 1 0 1 0 1 1 0 0 0 1 1 0 1 0 1
D31 DB1 1 1 0 0 1 0 1 0 1 0 1 0 0 1 1
* *
- 14dB - 12dB - 10dB - 8dB - 6dB - 4dB - 2dB + 0dB + 2dB + 4dB + 6dB + 8dB + 10dB
* *
+ 12dB + 14dB
(2) Port output
D41 D61 Out:H Out:L D51 D71 1 0
(3) BYPASS control
DD1 BYPASS TONE 1 0
Note : Do not input other data than the above.
MITSUBISHI ELECTRIC
8
MITSUBISHI SOUND PROCESSOR ICs
M62446AFP
6CH ELECTRONIC VOLUME WITH TONE CONTROL
(4)-1 VOLUME ( 0 to -39dB )
A T T
Note : Do not input other data than the above.
VOLUME
0dB -1dB -2dB -3dB -4dB -5dB -6dB -7dB -8dB -9dB -10dB -11dB -12dB -13dB -14dB -15dB -16dB -17dB -18dB -19dB -20dB -21dB -22dB -23dB -24dB -25dB -26dB -27dB -28dB -29dB -30dB -31dB -32dB -33dB -34dB -35dB -36dB -37dB -38dB -39dB
D0X D1X D2X D3X D4X D5X D6X D7X D8X D9X DAX DBX DCX DDX 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 0 0 0 0 1 1 1 1 0 0 0 0 1 1 1 1 0 0 0 0 1 1 1 1 0 0 0 0 1 1 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1
MITSUBISHI ELECTRIC
9
MITSUBISHI SOUND PROCESSOR ICs
M62446AFP
6CH ELECTRONIC VOLUME WITH TONE CONTROL
(4)-2 VOLUME( -40 to -dB )
A T T
Note : Do not input other data than the above.
VOLUME
-40dB -41dB -42dB -43dB -44dB -45dB -46dB -47dB -48dB -49dB -50dB -51dB -52dB -53dB -54dB -55dB -56dB -57dB -58dB -59dB -60dB -61dB -62dB -63dB -64dB -65dB -66dB -67dB -68dB -69dB -70dB -71dB -72dB -73dB -74dB -75dB -76dB -77dB -78dB -79dB -dB
D0X D1X D2X D3X D4X D5X D6X D7X D8X D9X DAX DBX DCX DDX 0 0 1 1 0 0 0 0 0 0 1 1 0 1 1 0 0 1 0 1 0 0 1 0 1 0 1 1 0 1 0 1 1 0 0 0 1 0 1 1 0 1 0 0 1 1 1 1 0 0 0 1 1 1 1 1 0 1 1 0 0 0 0 0 1 1 0 0 0 1 1 0 0 1 0 0 1 1 0 0 1 1 0 1 0 1 0 1 0 0 1 0 1 0 1 0 1 1 0 1 1 0 1 1 0 0 1 1 0 1 1 1 0 0 0 1 1 0 1 1 0 0 1 1 0 1 0 1 0 1 1 1 0 1 1 0 1 1 1 0 0 0 1 1 1 0 1 1 0 1 1 1 0 1 0 1 1 1 1 0 1 1 1 1 0 1 1 1 1 0 0 0 0 0 0 1 0 0 0 0 0 1 1 0 0 0 0 1 0 1 0 0 0 0 1 1 1 0 0 0 1 0 0 1 0 0 0 1 0 1 1 0 0 0 1 1 0 1 0 0 0 1 1 1 0 0 0 1 0 1 0 1 0 0 1 0 1 0 0 1 0 1 0 0 1 1 1 0 1 0 0 1 0 0 1 1 0 1 0 1 0 1 1 0 1 0 0 1 1 1 0 1 0 1 1 1 1 0 1 0 1 0 1 0 0 0 0
MITSUBISHI ELECTRIC
10
MITSUBISHI SOUND PROCESSOR ICs
M62446AFP
6CH ELECTRONIC VOLUME WITH TONE CONTROL
(4)-3 VOLUME ( -80 to -dB )
This is an extended function from M62446FP.
A T T
D0X D1X D2X D3X D4X D5X D6X
VOLUME
-dB -dB -dB
D7X D8X D9X DAX DBX DCX DDX 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 0 0 0 1 1 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 0 0 0 0 0 1 1 0 0 0 0 1 1 1 1 0 0 0 0 1 1 1 1 0 0 0 1 1 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1
-dB -dB -80dB -81dB -82dB -83dB -84dB -85dB -86dB -87dB -88dB -89dB -90dB -91dB -92dB -93dB -94dB -95dB -dB -dB
-dB -dB
1 1
1 1
1 1
1 1
1 1
1 1
0 1
MITSUBISHI ELECTRIC
11
MITSUBISHI SOUND PROCESSOR ICs
M62446AFP
6CH ELECTRONIC VOLUME WITH TONE CONTROL ELECTRICAL CHARACTERISTICS
(Ta=25C, AVDD/AVSS/DVDD=7/-7V/5V , f=1kHz,unless otherwise noted. Rg=1K, RL=10K, TONE CONTROL * VOL are set to 0dB/FLAT.)
(1) Power supply characteristics
Parameter
Analog positive circuit current Analog negative circuit current Digital circuit current (2) Input / Output characteristics
Symbol
AIdd
Test condition
Current at pin 5 No signal Current at pin 30 No signal Current at pin 42 No signal
Limits Min typ 22 2 Max 35
Unit
mA
AIss DIdd
22
35
mA
1.0
2.0
mA
Limits
Parameter
Input resistance Maximum output voltage
Symbol
Ri VOM Gv
Test condition
13,15,16,17,27,29pin 6,8,9,11,13,15,16,17pinINPUT 31 to 36pinOUTPUT
Min 35 3.0
typ 70 4.2
Max 150
Unit
K Vrms
THD=1% Pass gain
Vi=0.2Vrms,FLAT ,8,9,11,13,15,16,17pinINPUT 31 to 36pinOUTPUT BW=400 to 30KHz
-2.0
0
2.0
dB
Distortion
THD
Vi=0.2Vrms , RL=10K 31 to 36pin,Rg=0K, JIS-A,VOL=0dB 31,32pin JIS-A,VOL=0dB
0.002 0.09
%
Vn(VOL) Output noise voltage Vn(tone)
1.5 5
6 20
Vrms Vrms
Maximum attenuation
ATTmax
31 to 36pin JIS-A,VOL=-dB
-100
-95
dB
Volume gain between channels Crosstalk between channels Port output current
Dvol
-1.5
0
1.5
dB
CT
Vo=0.5Vrms , RL=10K,JIS-A Rg=1K
-80 0.2
-65
dB mA
IL
MITSUBISHI ELECTRIC
12
MITSUBISHI SOUND PROCESSOR ICs
M62446AFP
6CH ELECTRONIC VOLUME WITH TONE CONTROL (3) Tone control characteristics
(Note) * is an expanded function.
Parameter
Symbol
Test condition
TLEBLE(f=10kHz), BASS(f=100Hz)
Limits Min 12 10 8 typ 14 12 10 8 6 4 2 -2 -4 -6 -8 -10 -12 -14 Max 16 14 12 10 7.5 5.5 3 -1 -2.5 -4.5 -6 -8 -10 -12
Unit
dB dB dB dB dB dB dB dB dB dB dB dB dB dB
* T +14dB Vo=0.2Vrms * T +12dB
T +10dB T +8dB T +6dB T +4dB T +2dB Tone control voltage gain T -2dB T -4dB T -6dB
Voltage gain Input to pin13,15 Output from pin31,32
6 4.5
INPUT 13,15pin OUTPUT 31,32pin
2.5 1 -3 -5.5 -7.5 -10 -12 -14 -16
T -8dB T -10dB
* T -12dB * T -14dB
Balance between channel BALT Input 13 ,15pin Vo=0.2Vrms Output31,32pin
-1.5
0
+1.5
dB
MITSUBISHI ELECTRIC
13
MITSUBISHI SOUND PROCESSOR ICs
M62446AFP
6CH ELECTRONIC VOLUME WITH TONE CONTROL
TEST CIRCUIT
1 22K 2 22K 3 22K 4 22K 22 + AVDD Vi6 (SW) 1K 3.3 Vi8 (SR) Vi9 (SL) 1K 3.3 70K 70K Vi11 (C) 1K 3.3 70K Vi13 (R) 1K Vi15 (L) Vi16 (BYPASSR) Vi17 (BYPASSL) 3.3 1K 1K 1K 8200p 3.3 3.3
1 2 3 4 5
3.3
+ -
42 41 CLK 40 DATA 39 LATCH 38 37 36 35 34 33
+ - S T + -
22 + 3.3 3.3 8200p 0.015 0.33 + 22
DVDD
< SW >
+ -
< SR >
+ -
6 7 8
1K
DGND AGND 3.3 10K 3.3 10K 3.3 10K 3.3 10K 3.3 10K 3.3 10K Vo36 Vo35 Vo34 Vo33 Vo32 Vo31 AVSS
< SL >
+ -
9 10 11 12 13 14
70K Bass
+ - - +
70K
3.3

S T
32 31 30 29 28

Treble
- +

15 16 17 18
Bass 70K
+ -
- +
Treble
- +
27 26 25

19
0.015
24 23 22
20
0.33
21
MITSUBISHI ELECTRIC
14
MITSUBISHI SOUND PROCESSOR ICs
M62446AFP
6CH ELECTRONIC VOLUME WITH TONE CONTROL SIGNAL PROCESSING DIAGRAM
BYPASS 3.3F
TONE in
TONE CONTROL (+14dB to -14dB)
BASS TLEBLE
70K
VOLUME Lch,Rch(0dB to -dB) + -
3.3F
70K
+ -
70K
+ -
3.3F
+ -
3.3F
8200pF 0.015F 0.33F
VOLUME in 3.3F
VOLUME Cch,SWch,SLch,SRch (0dB to -dB)
+ -
3.3F
Note.(1)The resistance value of Volume change about 18 to 22K by attenuated condition. (2)No built in a zero cross circuit. (3)When the mode changed(BYPASS/TONE),it is necessary the muting function.
DVDD(=5V) CLK,DATA,LATCH
S
OUTPUT PORT INPUT : Schmitt trigger type
OUTPUT port:PMOS transistor open drain
MITSUBISHI ELECTRIC
15
MITSUBISHI SOUND PROCESSOR ICs
M62446AFP
6CH ELECTRONIC VOLUME WITH TONE CONTROL APPLICATION EXAMPLE
(When using Tone control and Bypass)
0.001F
22K OUT4 22K OUT3 22K OUT2 22K OUT1
47F
10F
1 2 3 4
0.0047F +
42 OUTPUT PORT 41 MCU
volume
40 I/F 39
MCU
AVDD=7V
SWin
5 6 7
3.3F
volume
38 37 36
3.3F
3.3F
SRin
3.3F
8
3.3F
volume
35
3.3F
SLin
9 10
3.3F
34
3.3F
33
volume
3.3F
Cin
11 12
3.3F
32
3.3F
31
volume
Rin
13 14
3.3F
30
0.0047F +
29
3.3F
Lin
15
3.3F
28
volume
BYPASSRin BYPASSLin
16
3.3F
27
3.3F
17 18
8200pF
26 25
8200pF
19
0.015F
24
tone tone
20
0.33F
23
0.33F
21
22
MITSUBISHI ELECTRIC
+
DVDD=5V
DGND AGND SWout SRout SLout Cout Rout Lout AVSS=-7V
47F
0.015F
16
MITSUBISHI SOUND PROCESSOR ICs
M62446AFP
6CH ELECTRONIC VOLUME WITH TONE CONTROL
DETAILED DIAGRAM OF PACKAGE OUTLINE
42P2R-A
EIAJ Package Code SSOP42-P-450-0.80
42
MMP
JEDEC Code - Weight(g) 0.63
22
Plastic 42pin 450mil SSOP
Lead Material Alloy 42/Cu Alloy e b2
HE
E
e1
F
Recommended Mount Pad Dimension in Millimeters Min Nom Max 2.4 - - - - 0.05 - 2.0 - 0.5 0.4 0.35 0.2 0.15 0.13 17.7 17.5 17.3 8.6 8.4 8.2 - 0.8 - 12.23 11.93 11.63 0.7 0.5 0.3 - 1.765 - - 0.75 - - - 0.9 0.15 - - 0 - 10 - 0.5 - - 11.43 - - - 1.27
Symbol
1 21
A
G
D
A2 e y
b
A1
A A1 A2 b c D E e HE L L1 z Z1 y b2 e1 I2
L1
c z Z1 Detail G Detail F
L
I2
MITSUBISHI ELECTRIC
17
MITSUBISHI SOUND PROCESSOR ICs
M62446AFP
6CH ELECTRONIC VOLUME WITH TONE CONTROL
Keep safety first in your circuit designs! lMitsubishi Electric Corporation puts the maximum effort into making semiconductor products better and more reliable, but there is always the possibility that trouble may occur with them. Trouble with semiconductors may lead to personal injury, fire or property damage. Remember to give due consideration to safety when making your circuit designs, with appropriate measures such as (i) placement of substitutive, auxiliary circuits, (ii) use of nonflammable material or (iii) prevention against any malfunction or mishap. Notes regarding these materials lThese materials are intended as a reference to assist our customers in the selection of the Mitsubishi semiconductor product best suited to the customer's application; they do not convey any license under any intellectual property rights, or any other rights, belonging to Mitsubishi Electric Corporation or a third party. lMitsubishi Electric Corporation assumes no responsibility for any damage, or infringement of any third-party's rights, originating in the use of any product data, diagrams, charts, programs, algorithms, or circuit application examples contained in these materials. lAll information contained in these materials, including product data, diagrams, charts, programs and algorithms represents information on products at the time of publication of these materials, and are subject to change by Mitsubishi Electric Corporation without notice due to product improvements or other reasons. It is therefore recommended that customers contact Mitsubishi Electric Corporation or an authorized Mitsubishi Semiconductor product distributor for the latest product information before purchasing a product listed herein. The information described here may contain technical inaccuracies or typographical errors. Mitsubishi Electric Corporation assumes no responsibility for any damage, liability, or other loss rising from these inaccuracies or errors. Please also pay attention to information published by Mitsubishi Electric Corporation by various means, including the Mitsubishi Semiconductor home page (http://www.mitsubishichips.com). lWhen using any or all of the information contained in these materials, including product data, diagrams, charts, programs, and algorithms, please be sure to evaluate all information as a total system before making a final decision on the applicability of the information and products. Mitsubishi Electric Corporation assumes no responsibility for any damage, liability or other loss resulting from the information contained herein. lMitsubishi Electric Corporation semiconductors are not designed or manufactured for use in a device or system that is used under circumstances in which human life is potentially at stake. Please contact Mitsubishi Electric Corporation or an authorized Mitsubishi Semiconductor product distributor when considering the use of a product contained herein for any specific purposes, such as apparatus or systems for transportation, vehicular, medical, aerospace, nuclear, or undersea repeater use. lThe prior written approval of Mitsubishi Electric Corporation is necessary to reprint or reproduce in whole or in part these materials. lIf these products or technologies are subject to the Japanese export control restrictions, they must be exported under a license from the Japanese government and cannot be imported into a country other than the approved destination. Any diversion or reexport contrary to the export control laws and regulations of Japan and/or the country of destination is prohibited. lPlease contact Mitsubishi Electric Corporation or an authorized Mitsubishi Semiconductor product distributor for further details on these materials or the products contained therein.
MITSUBISHI ELECTRIC
18

▲Up To Search▲

Price & Availability of M62446AFP

	To Download M62446AFP Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .